Sorry, you need to enable JavaScript to visit this website.
Skip to main content

Publications in ISI Journal

  1. Mechanical properties, microstructure and toughness assessment of a X70 pipeline steel.
    Authors: Muneer Baig, Ehab El-Danaf, Mahmoud Soliman, Abdulhakim Almajid, Waleed Alshalfan, Khaled Alhajeri
    Journal: Materials Testing
    Publisher: Carl Hanser Verlag, Munchen
    Date: 15, 5Oct 2015
    Impact Factor: 0.299
  2. Conducting and Biopolymer Based Electrospun Nanofiber Membranes for Wound Healing Applications
    Authors: Mohammad R. Karim, Abdurahman Al-Ahmari, M.A. Dar, M.O. Aijaz, et al.
    Journal: Current Nanoscience
    Publisher: Bentham Science
    Date: Issue: 2 Volume: 12 1/4/2016
    Impact Factor: 0.934
  3. Conducting polyaniline-rutile TiO2 nanocomposites for the development of high-k dielectric materials
    Authors: Mohammad R. Karim, M. T. I. Bhuiyan, M. B. Zaman, C. J. Lee & M. S. Lee
    Journal: Soft Materials
    Publisher: Taylor & Francis
    Date: 2016, Vol. 14, No. 4, p. 238 -243
    Impact Factor: 1.333
  4. Conducting and Biopolymer Based Electrospun Nanofiber Membranes for Wound Healing Applications
    Authors: Mohammad R. Karim, Abdurahman Al-Ahmari, M.A. Dar, M.O. Aijaz, M.L. Mollah, P.M. Ajayan, J.H. Yeum and Kil-Soo Kim
    Journal: Current Nanoscience
    Publisher: Bentham Science
    Date: 2016, Vol. 12, No. 2, p. 1 - 7
    Impact Factor: 1.096
  5. Corrosion inhibitory effect of thiourea on recrystallized E-34 microalloyed steels in acidic media
    Authors: Asiful Hossain Seikh and Mohammad Rezaul Karim
    Journal: Anti-Corrosion Methods and Materials
    Publisher: Emerald Group Publishing Limited
    Date: Vol.62, No.4, 2015, pp. 212–219
    Impact Factor: 1.114
  6. Biomolecule conjugated nanoparticle synthons for detection of food contaminants
    Authors: Md. Badruz Zaman, Mohammad Rezaul Karim, Md. Ashrafuzzaman, and Pejman Hanifi-Moghaddam
    Journal: Canadian Journal of Chemistry
    Publisher: NRC research press
    Date: Vol. 93, 2015, pp. 1-4
    Impact Factor: 1.013
  7. Tuning of Spectral Response by Co-Sensitization in Black-Dye Based Dye-Sensitized Solar Cell
    Authors: Ashraful Islam, T. Swetha, Mohammad Rezaul Karim, Md. Akhtaruzzaman, Liyuan Han, and Surya Prakash Singh
    Journal: Physica Status Solidi A: Applications and Materials Science
    Publisher: Wiley VCH
    Date: Vol. 212, No. 3, 2015, p. 651 - 656
    Impact Factor: 1.610
  8. Laser from Optically Pumped Quantum Dot CdSe/ZnS in a Colloidal Liquid
    Authors: Saradh Prasad, K. H. Ibnaouf, M. S. AlSalhi, Kamal Alameh, D. Devaraj, A. Hamdan, M. R. Karim, M. B. Zaman, and V. Masilamani
    Journal: Journal of Nanoscience and Nanotechnology
    Publisher: American Scientific Publishers
    Date: Vol. 15, No. 9, 2015, p. 6710–6713
    Impact Factor: 1.556
  9. Synthesis and characterization of highly organized crystalline rutile nanoparticles by low-temperature dissolution-reprecipitation process
    Authors: Mohammad Rezaul Karim, MTI Bhuiyan, MA Dar, AH Seikh, MA Shar, MB Zaman, CJ Lee, HJ Kim, and MS Lee
    Journal: Journal of Materials Research
    Publisher: Cambridge Journals
    Date: Vol. 30, No. 12, 2015
    Impact Factor: 1.523
  10. Facile synthesis and electroactivity of 3-D hierarchically superstructured cobalt orthophosphate for lithium-ion batteries
    Authors: Changhoon Choi, Seung-Deok Seo, Hyun-Woo Shim, Mushtaq Ahmad Dar, In Sun Cho, Dong-Wan Kim
    Journal: Journal of Alloys and Compounds
    Publisher: Elsevier
    Date: 652 (2015) 100-105.
    Impact Factor: 2.9
  11. Comparison of catalytic performance of different types of graphene in LieO2 batteries
    Authors: Jung Eun Park, Gwang-Hee Lee, Mingu Choi, Mushtaq Ahmad Dar, Hyun-Woo Shim, Dong-Wan Kim
    Journal: Journal of Alloys and Compounds
    Publisher: Elsevier
    Date: 647 (2015) 231-237.
    Impact Factor: 2.9
  12. Catalytic growth of multi-walled carbon nanotubes using NiFe2O4 nanoparticles and incorporation into epoxy matrix for enhanced mechanical properties
    Authors: Hassan Javed, Mohammad Islam, Nasir Mahmood, Amine Achour, Asad Hameed,Nasrullah Khatri
    Journal: J Polymer Engg
    Publisher: DE Gruyter
    Date: Eng 2016; 36(1): 53–64
    Impact Factor: 0.631
  13. Reactive Pulsed Laser Deposited N-C Codoped TiO2 Thin Films
    Authors: I. Ruzybayev, E. Yassitepe, A. Ali, A. S. Bhatti, R. M. Mohamed, M. Islam, S. I. Shah
    Journal: Materials Science in Semiconductor Processing
    Publisher: Elsevier
    Date: 39 (2015) 371-376
    Impact Factor: 2.264
  14. Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films
    Authors: A. Safdar, M. Islam, A. Akram, M. Mujahid, Y. Khalid, S. I. Shah
    Journal: Journal of Materials Engineering and Performance
    Publisher: Springer
    Date: 25(2) (2016) 457-465
    Impact Factor: 1.094
  15. Titanium Nitride Films for Micro-Supercapacitors: Effect of Surface Chemistry and Film Morphology on the Capacitance
    Authors: A. Achour, R. Porto, M. Soussou, M. Islam, M. Boujtita, A. Kaltouma, L. B. Laurent, M. A. Djouadi, B. Thierry
    Journal: Journal of Power Sources
    Publisher: Elsevier
    Date: 300 (2015) 525-532
    Impact Factor: 6.217
  16. Electroless Ni-P/SiC Nanocomposite Coatings With Small Amounts of SiC Nanoparticles for Superior Corrosion Resistance and Hardness
    Authors: M. Islam, M. R. Azhar, Y. Khalid, R. Khan, H. S. Abdo, M. A. Dar, O. R. Oloyede, T. D. Burleigh
    Journal: Journal of Materials Engineering & Performance
    Publisher: Springer
    Date: 24(12) (2015) 4835-4843
    Impact Factor: 1.094
  17. Arrays of CZTS Sensitized ZnO/ZnS and ZnO/ZnSe core/shell Nanorods for Liquid Junction Nanowire Solar Cells
    Authors: M. Aftab Akram, S. Javed, M. Islam, M. Mujahid, A. Safdar
    Journal: Solar Energy Materials and Solar Cells
    Publisher: Elsevier
    Date: 146 (2016) 121-128
    Impact Factor: 5.337
  18. Phase Transformation Reaction Path during Sonication Assisted Solid State Synthesis of Cu2ZnSnSe4 Powder
    Authors: Z. Wang, E. Yassitepe, M. Islam, S. I. Shah
    Journal: Powder Technology
    Publisher: Elsevier
    Date: 295C (2016) 202-208
    Impact Factor: 2.349
  19. A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel Titanium-Based Shape Memory Alloy
    Authors: Al-Ahmari, AMA ; Rasheed, MS ; Mohammed, MK ; Saleh, T
    Journal: MATERIALS AND MANUFACTURING PROCESSES
    Publisher: TAYLOR & FRANCIS INC
    Date: MAR 11 2016
    Impact Factor: 1.419
  20. Optimal robotic cell scheduling with controllers using mathematically based timed Petri nets
    Authors: Al-Ahmari, A
    Journal: INFORMATION SCIENCES
    Publisher: ELSEVIER SCIENCE INC
    Date: FEB 1 2016
    Impact Factor: 3.364
  21. An automatic fixture modeling system using search strategy
    Authors: Nasr, EA ; Al-Ahmari, A ; Khan, AA ; Kamrani, A
    Journal: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    Publisher: SAGE PUBLICATIONS LTD
    Date: DEC 2015
    Impact Factor: 0.978
  22. Multiobjective optimization of Nd:YAG direct laser writing of microchannels for microfluidic applications
    Authors: Mohammed, MK ; Al-Ahmari, A; Umer, U
    Journal: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Publisher: SPRINGER LONDON LTD
    Date: NOV 2015
    Impact Factor: 1.568
  23. Computer-aided process planning in prismatic shape die components based on Standard for the Exchange of Product model data
    Authors: Khan, AA; Hussein, HM ; Nasr, ESA ; Al-Ahmari, A
    Journal: ADVANCES IN MECHANICAL ENGINEERING
    Publisher: SAGE PUBLICATIONS LTD
    Date: NOV 2015
    Impact Factor: 0.64
  24. A comparative study on the customized design of mandibular reconstruction plates using finite element method
    Authors: Al-Ahmari, A; Nasr, EA ; Moiduddin, ; Anwar, S ;Al Kindi, M ; Kamrani, A
    Journal: ADVANCES IN MECHANICAL ENGINEERING
    Publisher: SAGE PUBLICATIONS LTD
    Date: JUL 2015
    Impact Factor: 0.64
  25. Assessment of finite element and smoothed particles hydrodynamics methods for modeling serrated chip formation in hardened steel
    Authors: Usama Umer, Muneer Khan Mohammed, Jaber Abu Qudeiri and Abdulrahman Al-Ahmari
    Journal: ADVANCES IN MECHANICAL ENGINEERING
    Publisher: SAGE
    Date: Jun 2015
    Impact Factor: 0.64
  26. On tool–workpiece interactions during machining metal matrix composites: investigation of the effect of cutting speed
    Authors: A Ghandehariun, HA Kishawy, U Umer, HM Hussein
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer
    Date: Jun 2015
    Impact Factor: 1.568
  27. Analysis of tool-particle interactions during cutting process of metal matrix composites
    Authors: A Ghandehariun, HA Kishawy, U Umer, HM Hussein
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer
    Date: Jun 2015
    Impact Factor: 1.568
  28. Multi objective optimization of Nd: YAG direct laser writing of microchannels for microfluidic applications
    Authors: Muneer Khan Mohammed, Abdulrahman Al-Ahmari, Usama Umer
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer
    Date: Nov 2015
    Impact Factor: 1.568
  29. On Multistage Approach for Flexible Routing in Flexible Manufacturing Systems
    Authors: Jaber E. Abu Qudeiri, Usama Umera, Mustufa H. Abidia, Abdulrahman M. Al-Ahmarib, Fayiz Abu Khadra
    Journal: Advances in Mechanical Engineering
    Publisher: SAGI
    Date: Vol. 8(7) 1–11, 2016
    Impact Factor: 0.978
  30. Optimization the Parameters of RISE Feedback Controller Using Genetic Algorithm
    Authors: Fayiz Abu Khadra, Jaber Abu Qudeiri, Mohammed Alkhahtani
    Journal: Mathematical Problems in Engineering
    Publisher: Hindawi
    Date: Volume 2016, June 2016
    Impact Factor: 0.644
  31. Development of a virtual manufacturing assembly simulation system
    Authors: Al-Ahmari A.M.; Abidi M.H.; Ahmad A.; Darmoul S.
    Journal: Advances in Mechanical Engineering
    Publisher: SAGE
    Date: 8 (3), 28-03-2016
    Impact Factor: 0.640
  32. A comparison study on the design of mirror and anatomy reconstruction technique in maxillofacial region
    Authors: Moiduddin Khaja; Al-Ahmari Abdulrahman; Nasr Emad S. Abouel; Mian, Syed Hammad; Al Kindi, Mohammed
    Journal: Technology and Health Care
    Publisher: IOS Press
    Date: Vol. 24, Issue no. 3, pp. 377-389, 2016
    Impact Factor: 0.678
  33. Evaluation of titanium alloy fabricated using electron beam melting and traditional casting technique
    Authors: Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S. Abouel Nasr, Mohammed Al-Kindi and Mohammed Hamid
    Journal: Biomedical Research
    Publisher: Allied Academies
    Date: Special Issue Date:28 April 2016
    Impact Factor: 0.23
  34. Laser Ablation Process Competency to Fabricate Micro-channels in Titanium Alloy
    Authors: Naveed Ahmed, Saied Darwish,Abdulrahman M. Alahmari, Khayyam Salik
    Journal: Materials and Manufacturing Processes
    Publisher: Taylor & Francis
    Date: Issue 11, Volume 30 12-3-2015
    Impact Factor: 1.628
  35. Laser Ablation and Laser -hybrid Ablation Processes: A Review
    Authors: Naveed Ahmed,Saied Darwish,Abdulrahman M. Alahmari
    Journal: Materials and Manufacturing Processes
    Publisher: Taylor & Francis
    Date: Issue 9, Volume 31 3-7-2016
    Impact Factor: 1.628
  36. Micro-channels by Nd:YAG laser beam machining: fabrication, microstructures, and micro-hardness profiles
    Authors: Naveed Ahmed,Saied Darwish,,Abdulrahman M.Alahmari,Muhammad Ali Shar
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer London
    Date: Issue 5-8, Volume 78 14-5-2015
    Impact Factor: 1.79
  37. A comparison of laser beam machining of micro-channels under dry and wet mediums
    Authors: Saied Darwish,Naveed Ahmed Abdulrahman,M.,Alahmari,Nadeem Ahmad Mufti
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer London
    Date: Issue 9-12 Volume 83 1-4-2016
    Impact Factor: 1.79
  38. Laser beam micro-machining under water immersion
    Authors: Abdulrahman M. Alahmari,Naveed Ahmed,Saied Darwish
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer London
    Date: Issue 9-12 Volume 83 1-4-2016
    Impact Factor: 1.79
  39. Laser Beam Micro-milling (LBMM) of Selected Aerospace Alloys
    Authors: Abdulrahman M. Alahmari,Saied Darwish,Naveed Ahmed
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer London
    Date: 10.1007/s00170-015-8318-1 27-1-2016
    Impact Factor: 1.79
  40. Experimental Investigation of Dimensional Variation in Lasermachined Micro-channels produced in Titanium Alloy
    Authors: Naveed Ahmed,Saied Darwish,Abdulrahman M. Alahmari
    Journal: journal of laser micro/nanoengineering
    Publisher: Japan Laser Processing Society
    Date: Volume 11, No. 2 (12-5-2016)
    Impact Factor: 1.008
  41. Predicting surface quality of γ-TiAl produced by additive manufacturing process using response surface method
    Authors: Al-Ahmari, A., Ashfaq, M., Alfaify, A., Abdo, B., Alomar, A., & Dawud, A.
    Journal: Journal of Mechanical Science and Technology
    Publisher: Springer
    Date: 1, 30, 2016
    Impact Factor: 0.761
  42. Fabrication of corrosion-resistant Al2O3–CeO2 composite coating on AA7075 via plasma electrolytic oxidation coupled with electrophoretic deposition.
    Authors: Arunnellaiappan, T., Ashfaq, M., Krishna, L. R., & Rameshbabu, N.
    Journal: Ceramics International
    Publisher: Elsevier
    Date: 5, 42, Apr 2016
    Impact Factor: 2.758
  43. Additive Manufacturing of γ-TiAl: Processing, Microstructure, and Properties.
    Authors: Balla, V. K., Das, M., Mohammad, A., & Al-Ahmari, A. M.
    Journal: Advanced Engineering Materials
    Publisher: Wiley
    Date: 7, 18, July 2016
    Impact Factor: 1.82
  44. Porous γ-TiAl Structures Fabricated by Electron Beam Melting Process.
    Authors: Mohammad, A., Alahmari, A. M., Moiduddin, K., Mohammed, M. K., Alomar, A., & Renganayagalu, R. K.
    Journal: Metals
    Publisher: MDPI
    Date: 1, 6, Jan 2016
    Impact Factor: 1.574
  45. Effect of laser ablation parameters on surface improvement of electron beam melted parts.
    Authors: Mohammad, A., Mohammed, M. K., & Alahmari, A. M.
    Journal: The International Journal of Advanced Manufacturing Technology
    Publisher: Springer
    Date: 2016
    Impact Factor: 1.568
  46. Analysis and Characterization of the Role of Ni Interlayer in the Friction Welding of Titanium and 304 Austenitic Stainless Steel
    Authors: Muralimohan, C. H., Ashfaq, M., Ashiri, R., Muthupandi, V., & Sivaprasad, K.
    Journal: Metallurgical and Materials Transactions A
    Publisher: Springer
    Date: 1, 47, Jan 2016
    Impact Factor: 1.749
  47. Mechanical anisotropy and microstructural changes during cryorolling of Al–Mg–Si alloy.
    Authors: Naga Krishna, N., Ashfaq, M., Susila, P., Sivaprasad, K., & Venkateswarlu, K.
    Journal: Materials Characterization
    Publisher: Springer
    Date: 107, Sep 2015
    Impact Factor: 2.383
  48. Role of electrolyte additives on in-vitro corrosion behavior of DC plasma electrolytic oxidization coatings formed on Cp-Ti.
    Authors: S., H., Ashfaq, M., T., A., Harilal, M., & N., R.
    Journal: Surface and Coatings Technology
    Publisher: Elsevier
    Date: 292, Apr 2016
    Impact Factor: 2.139
  49. Corrosion Behavior in 3.5% NaCl Solutions of γ-TiAl Processed by Electron Beam Melting Process
    Authors: Seikh, A. H., Mohammad, A., Sherif, E.-S. M., & Al-Ahmari, A.
    Journal: Metals
    Publisher: MDPI
    Date: 4, 5, Dec 2015
    Impact Factor: 1.574
  50. Corrosion Behavior of API 2H and API 4F Steels in Freely Aerated 4.0 % Sodium Chloride Solutions
    Authors: El-Sayed M. Sherif, Magdy M. El Rayes
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 10, issue 7, P. 7493-7504 (2015)
    Impact Factor: 1.692
  51. Corrosion Properties in Sodium Chloride Solutions of Al–TiC Composites in situ Synthesized by HFIHF
    Authors: El-Sayed M. Sherif, Hany S. Abdo, Khalil Abdelrazik Khalil and Ahmed M. Nabawy
    Journal: Metals
    Publisher: MDPI
    Date: Vol. 5, 8th Oct., P. 1799-1811 (2015)
    Impact Factor: 1.574
  52. Corrosion Behavior in 3.5% NaCl Solutions of γ-TiAl Processed by Electron Beam Melting Process
    Authors: Asiful Hossain Seikh, Ashfaq Mohammad, El-Sayed M. Sherif and Abdulrahaman Al-Ahmari
    Journal: Metals
    Publisher: MDPI
    Date: Vol. 5, 8th Oct., P. 1799-1811 (2015)
    Impact Factor: 1.574
  53. Corrosion Behavior in Highly Concentrated Sodium Chloride Solutions of Nanocrystalline Aluminum Processed by High Energy Ball Mill
    Authors: El-Sayed M. Sherif, Jabair Ali Mohammed, Hany S. Abdo, and Abdulhakim A. Almajid
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 11, issue 2, P. 1355-1369 (2016)
    Impact Factor: 1.692
  54. Elemental, Morphological, and Corrosion Characterization of Different Surface States of Co-Cr Alloy for Prosthodontic Applications
    Authors: Youssef S. Al Jabbari, Argiro Ntasi, Mariana Gaintatzopoulou, Wolf Dieter Mueller, George Eliades, El-Sayed M. Sherif, Spiros Zinelis,
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 11, issue 4, P. 2982-2993 (2016)
    Impact Factor: 1.692
  55. Melt Processing and Charactrization of Al-SiC Nanocomposite, Al, and Mg Foam Materials
    Authors: Ahmed M. Nabawy, Khalil Abdelrazek Khalil, Abdurahman M. Al-Ahmari, and El-Sayed M. Sherif
    Journal: Metals
    Publisher: MDPI
    Date: Vol. 6 (5), May issue, 110 (2016)
    Impact Factor: 1.574
  56. Corrosion of Newly Manufactured Nanocrystalline Al and Two of its Alloys in stagnant 4.0% NaCl Solutions,
    Authors: El-Sayed M. Sherif, Hany S. Abdo, Jabair A. Mohammed, Abdulhakim A. Almajid and Asiful H. Seikh,
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 11, issue 6, P. 4598-4610 (2016)
    Impact Factor: 1.692
  57. Effect of Titanium Carbide content on the corrosion behavior of Al-TiC composites processed by high energy ball mill.
    Authors: El-Sayed M. Sherif, Hany S. Abdo, Khalil A. Khalil, Ahmed M. Nabawy
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 11, issue 6, P. 4632-4644 (2016)
    Impact Factor: 1.692
  58. Titanium carbide nanofibers-reinforced aluminum compacts, a new strategy to enhance mechanical properties
    Authors: Khalil Abdelrazek Khalil, El-Sayed M. Sherif, A. M. Nabawy, Hany S. Abdo, Wagih W. Marzouk and Hamad F. Al-Harbi,
    Journal: Materials
    Publisher: MDPI
    Date: Vol. 9 (5) May issue, 399 (2016)
    Impact Factor: 2.728
  59. Corrosion Behavior of Two cp Titanium Dental Implants Connected by Cobalt Chromium Metal Superstructure in Artificial Saliva and the Influence of Immersion Time
    Authors: Ala’a AlOtaibi, El-Sayed M. Sherif, Spiros Zinelis, Yousef AlJabbari
    Journal: International Journal of Electrochemical Science
    Publisher: Electrochemical Science Group (ESG)
    Date: Vol. 11, issue 7, P. 5877-5890 (2016)
    Impact Factor: 1.692
  60. The Influence of Transition Metals Addition on the Corrosion Resistance of Nanocrystalline Al Alloys Produced by Mechanical Alloying
    Authors: Asiful H. Seikh, Muneer Baig, Md. Asif Alam, H. R. Ammar
    Journal: Metals
    Publisher: MDPI
    Date: 6 (6), 140-152, 2016
    Impact Factor: 1.574
  61. Thermo-mechanical responses of nanocrystalline Al-Fe alloy processed using mechanical alloying and high frequency heat induction sintering
    Authors: M. Baig, H. R. Ammar and Asiful H. Seikh
    Journal: Materials Science and Engineering: A
    Publisher: Elsevier
    Date: 65(2), 132-141, 2016
    Impact Factor: 2.56
  62. Facile synthesis of epoxy nanocomposite coatings using inorganic nanoparticles for enhanced thermo-mechanical properties: A comparative study
    Authors: Rawaiz Khan, Muhammad Rizwan Azhar, Arfat Anis, Mohammad Asif Alam, M. Boumaza, Saeed M. Al-Zahrani
    Journal: Journal of. Coating. Tech and. Research.
    Publisher: AmericaCoatings Association
    Date: 015-9736-6 08 Sept 2015
    Impact Factor: 1.29
  63. Anticorrosive properties of olive oil polyurethanamide/ZnO biocomposite
    Authors: Manawwer Alam, Naser Mohammed Alandis, Eram Sharmin, Fahmina Zafar, Mohammad Asif Alam
    Journal: Korean Journal of Chem. Eng.,
    Publisher: Korean Journal of Chem. Eng.,
    Date: 33(5), 1736-1742 (2016)
    Impact Factor: 1. 16
  64. Studies on High Density Polyethylene Reinforced with Phosphate ore particles:Thermal,Rheological, Mechanical and Morphological Properties
    Authors: H. Shaikh, A. Anis, A.M. Poulose, M. Alam, M.N. A-Otaibi, MohammadAsif. Alam & S.M. Al-Zahrani
    Journal: Polymer-Plastics Technology and Eng..
    Publisher: Taylor & Francis Group
    Date: DOI: 10.1080/03602559.2016.1171875
    Impact Factor: 1. 48
  65. Quantum confinement and size effects in Cu2ZnSnS4 thin films produced using solution processed ultrafine nanoparticles
    Authors: Amna Safdar, Mohammad Islam, Iftikhar Ahmad, Aftab Akram, Mohammad Mujahid, Yasir Khalid, Yanqiu Zhu,
    Journal: Materials Science in Semiconductor Processing
    Publisher: Elsevier
    Date: 41(2016) 420–427
    Impact Factor: 1. 806
  66. Antibacterial, Structural and Optical Characterization of Mechano-Chemically Prepared ZnO Nanoparticles
    Authors: Umair Manzoor, Sumera Siddique, Rafay Ahmed, Zobia Noreen, Habib Bokhari, Iftikhar Ahmad
    Journal: PLOS ONE
    Publisher: PLOS.ORG
    Date: DOI:10.1371/journal.pone.0154704
    Impact Factor: 3.234
  67. Characterization of GNP-Containing Al2O3 Nanocomposites Fabricated via High Frequency-Induction Heat Sintering Route
    Authors: Iftikhar Ahmad, Mohammad Islam, Tayyab Subhani, and Yanqiu Zhu.
    Journal: J. of Materi Eng and Perform
    Publisher: ASM International
    Date: 2015 24:4236–4243
    Impact Factor: 1.0
  68. Toughening mechanisms and mechanical properties of graphene nanosheet-reinforced alumina
    Authors: Iftikhar Ahmad, Mohammad Islam, Hany Sayed Abdo, Tayyab Subhani, Khalil Abdelrazek Khalil, Abdulhakim A. Almajid, Bahareh Yazdani, Yanqiu Zhu
    Journal: Materials and Design
    Publisher: Elsevier
    Date: 88 (2015) 1234–1243
    Impact Factor: 3.5
  69. Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds
    Authors: Tayyab Subhani; Munaisra Latif; Iftikhar Ahmad; Sobia A Rakha; Naveed Ali; Aqeel A Khurram
    Journal: Materials and Design
    Publisher: Elsevier
    Date: 87 (2015) 436–444
    Impact Factor: 3.5
Last updated on : January 12, 2023 12:41am